TeeJet 70 Series Speed Area Monitor - Manual

70 Series Speed Area Monitor User Guide 98-05072 R2
1. Connections table and Assembly
Note: Boom Sense +12v supply MUST share the same ground as the console.
2. Functionality
Function Key Description
1. Power on Pro
The unit will power on and show the Info screen.
Software name and Version are displayed.
001-US
V1.12
2. Power off ↑ and ↓
The unit will power off
3. Selection of
working
screen ↑ or ↓
The first line on display shows Speed (MPH)
Second line is user selectable (Distance, Area, or Total Area)
Example:000
Shows Upper line Speed (MPH / KPH) and Lower line Distance (FT / M)
US Units
7.5MPH
105.7ft
Metric Units
12.0KPH
32.2M
4. Master On Pro
The Pro key will act as the master switch and when pressed the console will
begin to accumulate area and distance.
NOTE 1: The master switch must be off to enter into setup
NOTE 2: An external switch can be connected to the green boom sense wire
to signal to the console to start accumulating.
Contact Color Description
1
2 Wht/Grn SPEED signal
3 Green Boom Sense input (+12v = work)
4
5 Gray ALARM 1 output
6
7
8
9 Brown +12v Speed Sensor
10 Green GND for speed sensor
11 Yellow ALARM 2 output
12
View from cable (45-05429) side