TeeJet Legacy 6000 CAN Guide - Manual (Page 125)

Fieldware for the Legacy 6000
Software Version 2.11
Chapter 4 - Real-time Operation 4-11
Product Application
System, Warning and Error Messages
Fieldware for the Legacy 6000 provides system operation feedback in the form of System mes-
sages, Warnings, and Error Messages. This system information is displayed in the top portion
(banner bar) of the rates page and map page. Some messages are displayed on the lightbar, see
(Lightbar Index on page 5-35) for more information about these messages.
System Message
A system message does not obstruct real-time operation. The most common system message is
the System Ready, (Figure 4-10), message that occurs when the Legacy 6000 system is operating
properly.
Warning Message
A warning message does not obstruct real-time operation. When a warning message first appears
in the banner bar, the alarm sounds. The alarm can be muted by pressing the Alarm Mute soft-key.
The warning message remains in the banner bar until the situation causing the warning is
resolved. The alarm does not sound again until a new warning appears.Typical warning messages
relate to product application rates and speeds.
Figure 4-11: GSO Speed Warning Message
Figure 4-12: Under Application Warning Message
Displayed Warning