Metrohm 916 Ti-Touch - Manual (Page 90)

9.2 Reagent monitoring
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
74 ￭￭￭￭￭￭￭￭
916 Ti-Touch
auto
If a monitored parameter has reached the limit set, the method defined
below is started automatically.
Memory
This parameter can only be edited with Reagent replacement = auto.
Memory location the method is loaded from. All memory locations are
selectable, even if they are currently not accessible.
Selection Internal memory | External memory 1 | Exter-
nal memory 2 | Shared memory
Default value Internal memory
Shared memory
Shared directory in the network.
Method
This parameter can only be edited with Reagent replacement = auto.
Method used for emptying the titration cell.
NOTE
Make sure that the memory is accessible.
Entry 32 characters maximum
Selection Selection of stored methods