Metrohm 916 Ti-Touch - Manual (Page 441)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
31 Appendix
916 Ti-Touch
￭￭￭￭￭￭￭￭ 425
￭ Copy also the "MetrohmTools" folder with the "MUpdate-
Tool.exe" file to the external storage medium.
Make sure that the file is stored at the top level of the external
storage medium. This also applies to the "916" folder.
If this structure is not maintained, then the files will not be found,
because the directories are accessed directly during the update
process.
￭ Plug in the external storage medium at the Ti-Touch.
2 Opening the update dialog
￭ Under System ▶ Diagnosis, tap on the button Software
update.
3 Selecting the instrument
￭ Tap on the Control device list box and select the instrument to
be updated.
4 Selecting the file
￭ Tap on the Binary file list box.
The selection list with the BIN files saved in the "SwUpdates"
directory is opened.
￭ Select the required file.
￭ Tap on [Select].
￭ Update of the Ti-Touch: Continue with Step 5.
Update of the Sample Processor: Continue with Step 6.
5 Starting the update (916 Ti-Touch)
￭ Tap on the [Start] button (NOT on the [ ] fixed key).
￭ The message 023-102 Program update is displayed.
￭ Confirm the message with [Yes].
The update process is started, it runs automatically. The device is
automatically switched off and back on during this process, possibly
several times. No user intervention is required.