3 connecting a reference electrode, Connecting a reference electrode, Figure 7 – Metrohm 916 Ti-Touch User Manual

Page 37: Connecting a ph, metal or ion-selective electrode

Text mode
Original mode

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

4 Installation

916 Ti-Touch

￭￭￭￭￭￭￭￭

Figure 7

Connecting a pH, metal or ion-selective electrode

NOTE

The electrode cable is protected against accidental disconnection
of the cable by means of a pull-out protection. If you wish to
remove the plug, you will first need to pull back the outer plug
sleeve.

4.6.3

Connecting a reference electrode

Connect the reference electrode as follows:

1 Plug the electrode plug into the Ref. socket of the Ti-Touch.