Metrohm 916 Ti-Touch - Manual (Page 271)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Manual control
916 Ti-Touch
￭￭￭￭￭￭￭￭ 255
[Dosing device 1…4]
Selection of the dosing device. The MSB connector and the type of the
connected dosing device are displayed.
Next to the button various information is shown:
￭ Titrants
For dosing devices of the type 8XX with an intelligent exchange unit or
dosing unit the titrant name is read off the data chip.
￭ Cylinder volume
For dosing devices of the type 8XX with an exchange unit without data
chip the cylinder volume is displayed only.
￭ ---
For exchange or dosing units which are not or not correctly attached.
￭ Manual busy
When a dosing function is being carried out.
[All dosing devices]
Carrying out the functions [Prepare], [Empty] and [Fill] at the same time
with several dosing devices of the control device.
Selecting the dosing function
If only one dosing device is connected, then the properties of this dosing
device will be shown directly. This information varies according to the type
of dosing device: