Metrohm 916 Ti-Touch - Manual (Page 19)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
916 Ti-Touch
￭￭￭￭￭￭￭￭ 3
￭ Sensor connectors
One connection each for:
– potentiometric electrodes (pH, ISE, metal)
– reference electrodes
– polarizable electrodes
– intelligent electrodes (iTrodes)
– temperature sensors (Pt1000 or NTC)
￭ Stirrer connector
For connecting a propeller stirrer.
￭ Ethernet connector
For connecting the Ti-Touch to a network.
1.1.3 Intended use
The 916 Ti-Touch is designed for usage as a titrator in analytical laborato-
ries. Its main application field is volumetric titration.
This instrument is suitable for processing chemicals and flammable sam-
ples. The usage of the 916 Ti-Touch therefore requires that the user has
basic knowledge and experience in the handling of toxic and caustic sub-
stances. Knowledge with respect to the application of the fire prevention
measures prescribed for laboratories is also mandatory.
1.2 About the documentation
CAUTION
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.2.1 Symbols and conventions
The following symbols and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method Dialog text, parameter in the software
File ▶ New Menu or menu item