Metrohm 916 Ti-Touch - Manual (Page 106)

11.3 Ti-Touch
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
90 ￭￭￭￭￭￭￭￭
916 Ti-Touch
Send only during running determination
on | off (Default value: on)
If this parameter is activated, then messages will be sent as e-mails only if
a determination is running. Deactivate this parameter if messages are also
to be sent in normal status.
Mail server
Address of the mail server for outgoing mail, e.g. mail.metrohm.ch. You
can find the address of the mail server either in your e-mail program set-
tings or obtain it from your IT department.
Entry 24 characters maximum
Default value empty
Sender
E-mail address of the sender. This address must be formatted as an e-mail
address, but need not necessarily correspond to an existing e-mail
account, e.g. [email protected].
Entry 24 characters maximum
Default value empty
Recipient
The messages will be sent to this e-mail address.
Entry 24 characters maximum
Default value empty
11.3.2 PC/LIMS report
916 Ti-Touch: Edit ▶ PC/LIMS report
You can generate a machine-readable report with all of the important
data concerning a determination, which is referred to as a PC/LIMS report.
This report can be saved as a TXT file or sent to a terminal program or a
LIMS via an RS-232 interface:
￭ manually with the [ ] fixed key (see Chapter 26, page 242).
￭ automatically at the end of a determination (see Chapter 16.5.6, page
184).
The file name of the TXT file is constructed as follows: PC_LIMS_Report-
ID1-YYYYMMDD-hhmmss.txt. A detailed description of the contents of
the PC/LIMS report can be found in the PC/LIMS Report Guide.
Memory
Memory location where the PC/LIMS report is stored as a TXT file. The
report will be saved in the directory pc_lims_report. This directory will be