Metrohm 916 Ti-Touch - Manual (Page 273)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Manual control
916 Ti-Touch
￭￭￭￭￭￭￭￭ 257
[Dosing fixed vol.]
Dose a specified volume (see Chapter 27.3.2, page 258).
[Dosing]
Dose continuously (see Chapter 27.3.1, page 257).
27.3.1 Continuous dosing
Manual control: Dosing ▶ Dosing
With the function [Dosing], dosing is continuous for as long as you hold
the button [Dose] pressed down.
Proceed as follows:
1 Configure the dosing function
NOTE
￭ The dosing and filling rates should be decreased for viscous liq-
uids.
￭ The maximum dosing and filling rates depend on the cylinder
volume (see Chapter 31, page 406).
￭ Enter the dosing rate.
￭ Enter the filling rate.
2 Start dosing
￭ Tap on [Dose].
The volume dosed is displayed. When the volume of one cylinder has
been dosed, the dosing cylinder will be refilled automatically.