Metrohm 916 Ti-Touch - Manual (Page 25)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Overview of the instrument
916 Ti-Touch
￭￭￭￭￭￭￭￭ 9
3.2 Rear of the instrument
3 4 5 6 7 8 9 1 2
10 11 12
Figure 2 Rear 916 Ti-Touch
1 Electrode connector (Ind.)
For connecting pH, metal or ion-selective
electrodes with integrated or separate refer-
ence electrode. Socket F. 2 Electrode connector (Ref.)
For connecting reference electrodes, e.g.
Ag/AgCl reference electrode. Socket B,
4 mm.
3 USB connector (type A)
For connecting a printer, USB flash drive,
USB hub, USB Sample Processor etc. 4 Ethernet connector (RJ-45)
For connecting to a network.
5 Temperature sensor connector (Temp.)
For connecting temperature sensors (Pt1000
or NTC). Two B sockets, 2 mm. 6 Electrode connector (Pol.)
For connecting polarizable electrodes, e.g.
Pt wire electrodes. Socket F.
7 MSB connector (MSB 1 and MSB 2)
Metrohm Serial Bus. For connecting external
dosing devices, stirrers or a Remote Box.
Mini DIN, 8-pin. 8 Power socket (Power)
For connecting the external power supply
unit.
9 Power switch
Switches the instrument on/off. 10 Electrode connector (iConnect)
For connecting electrodes with integrated
data chip (iTrodes).
11 Stirrer connector
For connecting the propeller stirrer (802 Stir-
rer).
12 Type plate
Contains the serial number.