Metrohm 916 Ti-Touch - Manual (Page 135)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
916 Ti-Touch
￭￭￭￭￭￭￭￭ 119
Device name
Here you can enter a device name of your choice.
Entry 24 characters maximum
Comment
Entry 24 characters maximum
Balance type
If you have connected a balance, then you have to specify the balance
type here.
Selection AND | Mettler | Mettler AT | Mettler AX |
Ohaus | Precisa | Sartorius | Shimadzu
Default value Sartorius
RS-232
RS-232 interface to which the balance is connected. The interface param-
eters are adjusted in the Edit device / Port parameters dialog (see
Chapter 11.9, page 120).
Selection COM 1 | COM 2
Default value COM 1
COM 2
The interface is disabled.
The following table indicates the balance type that needs to be selected
for the balance model:
Balance Balance type
AND AND
Mettler AB, AE, AG, AM,
AJ, PE, PM, PJ, PR, XP, XS Mettler
Mettler AT Mettler AT
Mettler AX, MX, UMX, PG,
AB-S, PB-S Mettler AX
Ohaus Voyager, Explorer,
Analytical Plus Ohaus
Precisa Precisa
Sartorius Sartorius
Shimadzu BX, BW Shimadzu