Metrohm 916 Ti-Touch - Manual (Page 377)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 Parameters
916 Ti-Touch
￭￭￭￭￭￭￭￭ 361
Calculation formula
Shows the calculation formula. A special editor is opened for the defini-
tion (see Chapter 28.9.3, page 362).
Entry max. 100 characters
Default value empty
Decimal places
Number of decimal places used to display the result.
Input range 0 - 5
Default value 2
Result unit
The result unit is displayed and saved together with the result.
Entry max. 10 characters
Selection % | mol/L | mmol/L | g/L | mg/L | mg/mL | mg/
100 g | ppm | g | mg | µg | mL | µL | mg/piece |
°C | µg/min | mL/min | µL/min
Default value %
[Note]
Entering a note on the calculation.
Dialog "Edit calculation / Note"
In this dialog you can enter a short text, e.g. to describe the variables
used.
Displaying the live result
Proceed as follows to display the live result in the live display:
1 Start the determination
￭ Tap on [ ].
The determination starts and the live display is shown:
2 Define the display options
￭ Tap on the button [View].
￭ Tap on the button [Meas. value options].
A maximum of three measured values can be shown in the live
display.
￭ Select the option Live result at one of the three parameters.