Metrohm 916 Ti-Touch - Manual (Page 275)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Manual control
916 Ti-Touch
￭￭￭￭￭￭￭￭ 259
You can dose a particular volume with the [Dosing fixed vol.] function.
Proceed as follows:
1 Configure the dosing function
NOTE
￭ The dosing and filling rates should be decreased for viscous liq-
uids.
￭ The maximum dosing and filling rates depend on the cylinder
volume (see Chapter 31, page 406).
￭ Enter the desired volume.
￭ Enter the dosing rate.
￭ Enter the filling rate.
2 Start dosing
￭ Tap on [Start].
The volume display is shown. When the volume of one cylinder has
been dosed, the dosing cylinder will be refilled automatically.