Metrohm 916 Ti-Touch - Manual (Page 88)

9.2 Reagent monitoring
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
72 ￭￭￭￭￭￭￭￭
916 Ti-Touch
Reagent
The designation of the reagent is used for unambiguous identification.
Entry 24 characters maximum
Comment
Entry 24 characters maximum
[Reagent monitoring]
Set the parameters for the reagent monitoring, see following chapter.
9.2 Reagent monitoring
The conditions for the monitoring of the reagent are defined in the dialog
Edit reagent / Reagent monitoring.
If one of the following values is reached, then the reagent must be
replaced. The values are checked in the following cases:
￭ at the start of the determination.