Metrohm 916 Ti-Touch - Manual (Page 276)

27.3 Dosing
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
260 ￭￭￭￭￭￭￭￭
916 Ti-Touch
Continuous dosing is paused with [Hold]. The label changes to
[Continue]. This can be used to continue the run.
3 Fill the cylinder
With the default settings (see "Fill automatic.", page 261) the dos-
ing cylinder is filled automatically.
Otherwise:
￭ Tap on [Fill].
The dosing cylinder is filled. The displayed volume value will be reset
to 0.0000 mL.
Parameter description
Volume
Volume which is dosed.
Input range 0.00000 - 99999.9 mL
Default value 0.10000 mL
Dosing rate
Rate at which it is dosed.
Input range 0.01 - 166.00 mL/min
Selection maximum
Default value maximum
maximum
The maximum dosing rate depends on the cylinder volume (see Chap-
ter 31, page 406).
Filling rate
Rate at which the dosing cylinder is filled.