Metrohm 916 Ti-Touch - Manual (Page 439)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
31 Appendix
916 Ti-Touch
￭￭￭￭￭￭￭￭ 423
4 Tap on all of the fixed keys one after the other in any sequence.
The result is displayed in each case with a short information text, e.g.
[Print] key OK.
5 Finish Touch screen test with [ ].
31.9.6 Software update (loading program versions and language files)
System ▶ Diagnosis ▶ Software update
New program versions or language files can be loaded from an external
storage medium (e.g. USB flash drive). The corresponding files must be
stored on the storage medium in the 916/SwUpdates directory (see
"Directory structure", page 130).
NOTE
If you wish to update a connected Sample Processor together with the
Ti-Touch, then do not fail to update the control software of the
Ti-Touch first and then afterwards the device program (firmware) of the
Sample Processor.
NOTE
Before carrying out the software update, make a backup in order to
save your data and the system settings (see Chapter 12.3, page 131).
Program files
The files are instrument-specific. The file names are structured as follows:
￭ Control software for 916 Ti-Touch:
5XXXyyyy.BIN
5XXXyyyy.MBIN
– XXX = instrument type (i.e. "916" for the 916 Ti-Touch)
– yyyy = program version
￭ Firmware of the control device:
5XXXyyyy.BIN
– XXX = instrument type (e.g. 814 for the 814 USB Sample Pro-
cessor)
– yyyy = program version
Language files
Language files may have the following content:
￭ one or more additional dialog languages