Metrohm 916 Ti-Touch - Manual (Page 216)

20.1 General
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
200 ￭￭￭￭￭￭￭￭
916 Ti-Touch
[Edit]
Edit the data of the selected line (see Chapter 20.2, page 201).
Saving a sample table
NOTE
Sample tables can only be saved on external storage media or on a
shared file system.
Proceed as follows to save a sample table:
1 Open the dialog
￭ In the dialog Sample table, tap on the button [Load/ Save].
The dialog Sample table / Load/Save is displayed.
If no external storage medium is plugged in or if no file system is
shared, then [Save] is disabled.
2 Modify/apply a name
￭ Tap on [Save].
A name is suggested for new sample tables. If the sample table
has already been saved, the previous name will be displayed.
Apply the name:
￭ Tap on [Save].
The sample table is saved.
Enter a new name:
￭ Tap on the input field File name.
The text editor opens.
￭ Enter a new file name (max. 32 characters) and confirm with
[OK].
￭ Tap on [Save].
The sample table is saved.