Metrohm 916 Ti-Touch - Manual (Page 167)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
15 Templates
916 Ti-Touch
￭￭￭￭￭￭￭￭ 151
15 Templates
Main dialog: System ▶ Templates
You have the option of defining system-specific templates. You can
use these templates when editing the respective data.
You can create the following templates:
￭ Sample data (see Chapter 15.1, page 151)
Create sample identifications and sample assignments.
￭ Custom result templates (see Chapter 15.2, page 155)
Define formulas for result calculations.
￭ Input lines (see Chapter 15.3, page 159)
Define input signals on the remote interface.
￭ Output lines (see Chapter 15.4, page 161)
Define output signals on the remote interface.
￭ Custom calib. buffers (see Chapter 15.5, page 164)
Define a buffer series for the calibration of pH electrodes.
￭ Report header (see Chapter 15.6, page 166)
Create a system-specific report header that contains information con-
cerning the laboratory, for example.
￭ Custom electrode type (see Chapter 15.7, page 167)
Define customized limit values for the electrode test of pH electrodes.
15.1 Sample data
Main dialog: System ▶ Templates ▶ Sample data
You can create the following templates in the dialog Templates / Sam-
ple data: