Metrohm 916 Ti-Touch - Manual (Page 290)

27.6 USB Sample Processor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
274 ￭￭￭￭￭￭￭￭
916 Ti-Touch
2 Assign the external position
￭ Tap on [Assign Ext. pos.].
The dialog External position / Assign swing angle is dis-
played.
￭ Select the desired external position and tap on [Assign].
The current angle position of the robotic arm is assigned to the exter-
nal position.
3 Move to the external position
￭ Tap on [ ].
The next higher-level dialog is displayed.
￭ Select Move to ext. pos. = External position X (X = 1…4) and
tap on [Start].
The robotic arm swings to the desired position.
4 Move to lift position
￭ Move the lift to the desired height with the arrow keys [ ⇧] or [⇩].