Metrohm 916 Ti-Touch - Manual (Page 108)

11.3 Ti-Touch
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
92 ￭￭￭￭￭￭￭￭
916 Ti-Touch
CAUTION
If the computer on which you share a memory location does not have
the same subnet mask as the Ti-Touch, then a WINS server must be
present. The computer must be entered in this server.
Computer
Host name of the computer on which a memory location is to be shared.
If you are working with Windows, then you will find the host name of the
computer as follows: In the Windows command prompt window, enter
the command ipconfig -all. The host name is listed together with other
parameters of the computer.
Do not under any circumstances enter an IP address in this input field.
Entry max. 32 characters
Default value empty
Share name
Share name of the shared memory location (file directory) on the above-
specified computer. Please note that the Share name of a file directory
often does not match the name of the file directory. The share name can
be found on the Release tab in the Properties dialog of the shared file
directory.
Entry max. 32 characters
Default value empty
Domain
Network domain in which the above-specified computer is located. If you
are working with Windows, then you will find the domain name as fol-
lows: In the Windows command window, enter the command ipconfig
-all. The domain is listed together with other parameters of the computer.
Leave the field empty if the computer is not located within a domain.
Entry max. 32 characters
Default value empty
User
User name of the user authorized to access the shared memory location.
Entry max. 32 characters
Default value empty
Password
Password of the user configured on the computer.