Wasp Barcode Inventory Control User Manual
Page 502
InventoryControl Printable Help
Locations
Messages
"Location is not valid."
This message displays if you do not enter a Location in the Location field or too many
ield. You must enter a Location in the Add,
n
add a new Location
characters have been entered in the Location f
Remove, Move, Adjust and Stage screens. You ca
on the mobile
device database.
device if the one you need is not currently in the mobile
Do you want to add this new location:
enter a Location that does not exist in the mobile device
"Location does not exist.
This message displays if you
database.
if you want to add this Location to the database.
Move
Messages
"Source and Destination sites are set to be the same. Destination site and location
different than the Source Site and Location."
nd Location for both the Source from
ination to which you were moving the Item. You
cannot have the same Site and Location for both the Source and the Destination.
e From Site and From Loc fields, or
change the Site and Location in the To Site and To Loc fields.
Site/Location fields, you are trying to move an Item from its current Location to its current
Location.
ated at Site 201, Location A20, to move it to another site you must
on, such as Site 100, Location B13.
needs to be
This message indicates you selected the same Site a
which you were moving the Item and the Dest
You must either change the Site and Location in th
For example, if you entered Site 201 and Location A20 in both the Source and Destination
If the Item is currently loc
enter a different Destinati
487