Wasp Barcode Inventory Control - Manual (Page 369)

InventoryControl Printable Help
F1=Prev F4=Next
Key in the inventory quantity being Removed and press ENT to complete the Remove
transaction. The Qty value entered must be numeric and it must be greater than zero.
If the Allow Negative Quantities on Mobile Devices option is disabled, you will see the
following message if you attempt to Remove more quantity than that which is available for this
Item at the specified Location.
Available:
83.0000
Not enough qty avail
able to complete the
transaction
ESC=Exit
Press ESC and enter a value that does not exceed the Available amount.
If this Item does have Tracked By enabled for Date Code, Pallet or Lot fields, a screen like the
one below will be shown, expecting input for each Tracked By field that's enabled.
Remove
100006
Paint Can
Pallet:
ESC=Cancel
F1=Prev F4=Next
Key in or scan values for each of the Tracked By fields, pressing F4 to advance to the next data
entry field.
If you press F4 to advance to the next data entry field, without first inputting a required Tracked
By value, a screen similar to the following will be displayed:
Please scan or key
in Pallet
ESC=Exit
Press ESC to Exit the error message and then provide the required Tracked By value (a Pallet,
in this example).
If the Allow Negative Quantities on Mobile Devices options is disabled, and a Tracked By
value that does not match a value associated with inventory available at the previously specified
Location is entered, the following screen will be displayed:
No item with this tr
ackby specific in st
ock
ESC=Exit
If Allow Negative Quantities on Mobile Devices is enabled, any Tracked By value is allowed.
354