Wasp Barcode Inventory Control - Manual (Page 311)

InventoryControl Printable Help
2. Select the Site, Location, Item Numbers, Customers, Suppliers, Purchase Orders (Pro and
Enterprise Versions Only) and Pick Orders (Pro and Enterprise Versions Only) to be downloaded
to the device, then click OK.
Select the Specify Filter button if you will be limiting the data. Click the Hand icon to access the
Find screen to search for data. The data you select on the Find screen will be entered in the text
box for that section and only that data will be sent to the mobile device. Please refer to the
Searching for Information topic for more information on the Find screen.
Select the Minimally Required checkbox to only send data that is required for normal operation.
For example, if you select to send all Items, but don't want to send all locations, only those
locations designated as Primary Locations for individual items will be sent. Or, if you don't want
to send all Suppliers, but some Suppliers are entered on the Item screen/Managing Suppliers
tab for items, only those suppliers entered on the Item screen will be sent.
Tips for Filtering Information
The default values apply no filtering to your data. All Items will be selected, including those which
are not yet in a Location.
Site:
Source: Specify or one of the Sites listed in the drop down list. This determines
which Sites will be shown in the Source Site list on the WDT2200.
This is the Site for all inventory transactions to be performed by the device. If you
want the device's database to include Items at more than one Site, select .
You can only select ALL or 1 specific site. For example, if you have 5 sites, you
cannot select 2 to be a Source. You can either select 1 or all.
Destination: If more than one Site is defined on the system and you have selected a
specific Site in the Source Site field, you can select one of the Sites listed in the
Destination drop down list. This determines which Sites will be shown in the Destination
Site list of the WDT2200 Site Configuration function and which locations will be listed in
the Move To list.
This field will be grayed-out with a value of , as shown above, if only one Site is
defined in InventoryControl or if a value of has been specified for the Source
Site. If a specific Site has been selected for the Source Site, that same site will be
the default value for Destination Site, but you can change the Destination Site to a
different value using the drop down list.
Source Site: Destination
Site:
The Source
Sites Listed in
the WDT2200
Site
Configuration
will Include:
The
Destination
Sites Listed
in the
WDT2200
Site
Configuration
will Include:
296