Wasp Barcode Inventory Control - Manual (Page 367)

InventoryControl Printable Help
and press Ent.
Press ESC for Menu
2. Press the PDT's Enter key after supplying an Item # or press the PDT's ESC key to return
to the Main Menu.
If the Item # entered is not found in the PDT's database, you will be prompted to try again, as
shown below:
Remove
Item #:
9999999
Entry not found.
Scan or key in value
and press Ent.
ESC=Menu
If the Item # entered is found in the database, the Item's Description will be displayed beneath
the Item #.
3. Scan or key in a Location value:
Remove
123
Monitor
Location:
AREA 2
ESC=Cancel
F1=Prev F4=Next
The Location field is required for all Remove transactions.
Enter a Location and press F4 to advance to the next data entry field.
or
Press F1 to go back to the previous data entry field.
or
Press ESC to cancel transaction and return to the previous screen.
If you press F4 to advance to the Customer field, without first providing a Location value, the
following message will be displayed:
Please scan or key
in Location
ESC=Exit
352