Wasp Barcode Inventory Control - Manual (Page 441)

InventoryControl Printable Help
20.10 Tips for Setting Up and Using Windows Mobile Devices
This section describes errors that may occur when setting up a wireless connection, printing to a
bluetooth printer and tips for getting various Wasp supported mobile devices up and running The
information in this topic will help get you up and running with InventoryControl and InventoryControl RF
on your wireless device. For help with your device that is not related to InventoryControl or
InventoryControl RF, keep in mind that detailed instructions specific to your device can be found in the
device manual.
The devices below are discussed in this section:
WDT3200 and WDT3250II
WPA1000 and WPA1000II
WDT1200, 1250, 1200II, 1250II
Other Devices
20.10.1 WDT3200, 3200II, 3250 and 3250II Tips
TIPS:
Enabling Bluetooth
Setting up the 3200 and 3250II to Print to a Bluetooth Printer
etooth Printer Setting up the 3200II to Print to a Blu
ERRORS:
Bluetooth Locks Up
Error Message: System.Net.Sockets.Socket Exception: An error message is available for the
exception but cannot be displayed because these messages are optional and are not currently
installed on this device. Please install .NETCFv35.Messages.EN.wm.cab to Windows Mobile.
ip: Enabling Bluetooth
avigate to: Start > Programs > Bluetooth > Bluetooth Power On
T
N
426