Wasp Barcode Inventory Control User Manual

Page 331

Text mode
Original mode

InventoryControl Printable Help

Configuring Sites:

1. The

Site Config function can be accessed by selecting the 6 key on the PDT Main Menu, or the

3 key if the PDT is in Audit Mode.

Site Config
Source/Dest Site
*(Select)

*(Select)

F1=Src F2=Dest
ESC=Menu

2. Select

Source Site by pressing the F1 key.

Source Site:
Warehouse 1

Press Ent to accept.
ESC to cancel

F1=Prev F4=Next

Above, the site WAREHOUSE 1 can be accepted as the Source Site by pressing the

key

to accept the value.

or

Press the F4 key to scroll to the next Site in the PDT database.

or

Press the F1 key to scroll to the next Site in the PDT database.

or

Press the Escape

key to cancel.

When a Source Site is selected, a screen similar to the one below will appear:

Site Config
Source/Dest Site
*Warehouse 2

*(Select)

F1=Src F2=Dest
ESC=Menu

3. Select

Destination Site by pressing the F2 key.

Dest Site:

316