Wasp Barcode Inventory Control - Manual (Page 326)

InventoryControl Printable Help
7) Press the Escape key to exit the system menu and return to the default power-on
prompt.
You should now perform the Setup Device function to load the InventoryControl program to your
WDT2200.
Instructions for Setting Date and Time on a WDT2200 That Already Has InventoryControl Installed:
1) If the InventoryControl Main Menu is currently displayed:
select 8-LOGOUT to exit to the InventoryControl Log On screen:
InventoryControl
User:
Password:
2) From the Log On screen, power off the WDT2200 by pressing and holding the power key
until no text is displayed on the screen.
3) With the WDT2200 powered off...
...hold down the CMD and left-arrow keys, then press the power key.
A START MENU will be displayed:
311