Wasp Barcode Inventory Control - Manual (Page 345)

InventoryControl Printable Help
Adjusting Inventory:
1. From the Main Menu, press the 4 key.
Adjust
Item #:
123
Scan or key in
value and press
Ent. Press ESC
for Menu.
2. Press the Enter key after supplying an Item # or press the ESC key to return to the Main Menu.
If the Item # entered is not found in the PDT's database, you will be prompted to try again, as
shown below.
Adjust
Item #:
99999999
Entry not found.
Scan or key in value
and press Ent.
ESC=Menu.
If the Item # entered is found in the PDT's database, the Item's Description will be displayed
beneath the Item #.
3. Scan or key in a Location value. If the Item # entered is found in the database, the Item's
Description will be displayed beneath the Item #.
Adjust
100007
Monitor
Location:
AREA 2
ESC=Cancel
F1=Prev F4=Next
The Location field is required for all Adjust transactions.
4. After entering a Location and press F4 to advance to the next data entry field.
or
Press F1 to go back to the previous data entry field.
or
330