IAI America XSEL-S - Manual (Page 85)

Chapter 2 Operations
77
(9) Generation of displacement data
Click the Create Displacement button in the Phase tab and generate displacement data.
Displacement data is generated in phase partition width from phase 0 to the maximum phase,
according to the defined section points and CAM curve.
It is possible to create displacement data in the following three methods.
[1] Create displacement data using section definition data
Figure 2.4.21 Section Definition Data
Figure 2.4.22 Displacement Data
Caution
Intervals between generated displacement data become linear. In order to make the CAM shape
smoother, make the phase partition width as small as possible.
Click the Create Displacement button.
Displacement data is generated.
Displacement
Phase
Small phase partition width
Large phase partition width