IAI America XSEL-S User Manual
Page 195
Chapter 6 Operations of X-SEL
PC Software Extension Motion Control Functions
187
Save Extension Motion Control Board Setting
Click the [Save As] button in the Setting Extension Motion Control Board window.
This button provides the same function as clicking [File] o [Save As].
Transfer Extension Motion Control Board Setting to Controller
Click the [Transfer to Controller] button in the Setting Extension Motion Control Board window.
* This button is enabled only in online status.
After transfer to the controller, the flash ROM write confirmation dialog box (Figure 2.23) appears.
Figure 2.23. Flash ROM Write Confirmation
Click to select the check boxes you want to write to the flash ROM (electronic CAM table device
No. 0, extension motion control board parameter device No. 0, etc.).
Click [Yes]: The memory data is written to the flash ROM.
Click [No]:
The memory data is not written to the flash ROM.
The memory data is discarded by resetting (turning the power supply on again or
resetting the software) and data is read from the flash ROM.