Luminex 100 IS Version 2.2 - Manual (Page 68)

Luminex 100 IS User Manual Version 2.2 x MAP Technology
6 - 14 PN 89-00002-00-069 Rev. A
Tabs
The main screen contains five tabs: Home, Run Batch, Maintenance,
Diagnostics, and Acquisition Detail. These tabs contain features and
commands performed during various stages of the sample acquisition
process. Each tab is described in the following sections.
Home Tab
The Home tab appears as part of the main screen. It contains a
Favorites list and five categories representing different data
Red Disconnected This term appears when the
software has not yet attempted to
connect or fails to connect to the
instrument. To connect the
instrument, power on the
Luminex 100 analyzer, then the
XY Platform and click Connect
on the toolbar.
Locked Out This term appears when another
application currently has control
of the instrument. The software
locks out as long as the other
application runs. To remove the
locked out status, close the other
application or wait until the
application completes.
Table 2. Status Bar
Communication Message Details (Continued)
Status Bar
Color
Message Indicates