Luminex 100 IS Version 2.2 - Manual (Page 209)

x MAP Technology Installation
PN 89-00002-00-069 Rev. A A - 3
Refer to the documentation that came with your PC to determine
if changing the voltage selection switch is required, and for
instructions on changing the switch setting.
9. Place the PC to the right of the Luminex 100 analyzer and the
Luminex XYP instrument.
10. Place the monitor on top of the PC and connect the monitor cable
to the PC. See Figure 133.
Figure 133. Luminex 100 IS System Setup
Note: Do not place the PC or
monitor on top of the Luminex 100
analyzer.
1
2
3
4
5
1. Monitor 4. Computer
2. Barcode Reader 5. XYP
3. Analyzer