Luminex 100 IS Version 2.2 - Manual (Page 67)

x MAP Technology Using Luminex 100 IS 2.2 Software
PN 89-00002-00-069 Rev. A 6 - 13
Status Communication
Messages
Table 2 shows the details of typical messages that appear in the
status bar.
Table 2. Status Bar
Communication Message Details
Status Bar
Color
Message Indicates
Green Idle This Command State term
appears when the software is
waiting to process the next
command. For example, idle
between commands.
Standby This Device Status term indicates
that the Luminex 100 analyzer is
ready and waiting to perform a
command.
Yellow Connecting This term appears when the
software attempts to connect to
the instrument.
Processing This term appears when the
instrument communicates with
the software as it processes
commands.
Pausing This term appears when the
software asks the instrument to
stop processing the list of
commands and the instrument
finishes up the active command.
Paused This term appears when the
software stops processing the list
of commands. A “resume”
function becomes available to
change the state back to
“processing.”
Busy This term appears when the
instrument is processing a
maintenance command.