Luminex 100 IS Version 2.2 - Manual (Page 111)

x MAP Technology Using Luminex 100 IS 2.2 Software
PN 89-00002-00-069 Rev. A 6 - 57
6. Click the Sample ID field on the last row for the empty well on
the microtiter plate. See Figure 55.
Figure 55. Entering Additional Samples
7. Enter the sample ID for the sample to add to the batch. Repeat
this step to add all of the additional samples to the batch. You
can enter the sample manually, through a patient list, or scanned
in using the system barcode reader.
8. To add a patient file to the batch, click Load Patient List. An
Open Patient List File dialog box appears. See Figure 56.
If you do not want to add a patient list to the batch, skip to
step 11.
Note: Batches may span
more than one plate. When
the first plate is full, a blue
line appears separating the
columns of the first plate
with those of a second plate.