Luminex 100 IS Version 2.2 - Manual (Page 24)

Luminex 100 IS User Manual Version 2.2 x MAP Technology
2 - 8 PN 89-00002-00-069 Rev. A
Biological
Heat
Blue Indicator Light
The blue light above the Luminex 100 analyzer Sample Arm simply
indicates the on/off status of the Luminex 100 analyzer, and is
harmless. The blue light-emitting diode (LED) does not emit light in
the UV spectrum.
Warning: During operation, this system contains exposed,
moving parts which could result in pinch point hazard. Risk of
personal injury is present. Keep hands and fingers away from the
Luminex XYP instrument slot during operation.
Note: Access doors must be
closed while operating Luminex
100 analyzer; operator must be
present during operation.
Warning: Human/animal samples may contain biohazardous
infectious agents.
Where exposure (including aerosol) to potentially biohazardous
material exists, operator should follow appropriate biosafety
procedures and use personal protective equipment, such as
gloves, gowns, laboratory coats, face shields, or mask ad eye
protection, and ventilation devices.
Observe all local, state, and federal biohazard handling
regulations when disposing of biohazard waste material.
Warning: The heater plate of the Luminex XYP instrument may
be hot and could cause personal injury if touched. Do not touch
the heater plate.