Luminex 100 IS Version 2.2 - Manual (Page 115)

x MAP Technology Using Luminex 100 IS 2.2 Software
PN 89-00002-00-069 Rev. A 6 - 61
Delete a Batch You can delete unprocessed batches (Save Only).
‹ To delete an unprocessed batch:
1. Click File. The file menu appears.
2. Click Delete Batch. A dialog box appears listing only the
unprocessed batches in the database.
3. Select the unprocessed batch that you want to delete.
4. Click Select. The system deletes the batch that you selected.
Create a Multi-
Batch
A multi-batch is a set of batches that you want to process
consecutively. You can add batches to the multi-batch from existing
batches in your database (Save Only), or you can create new batches
to add to the multi-batch. You can include as many batches as you
need in your multi-batch. The software does not limit you to a certain
number of batches per multi-batch.
‹ To create a new multi-batch:
1. Click Create New Multi-Batch on the toolbar. A Luminex
Multi-Batch Setup dialog box appears. See Figure 59.
2. If you want to add an existing batch to the multi-batch, click
Add Batch.
Note: Make sure that the
batch that you want to delete is
the batch that you selected.
Once you delete a batch, you
cannot recover it.