Luminex 100 IS Version 2.2 - Manual (Page 167)

x MAP Technology Using Luminex 100 IS 2.2 Software
PN 89-00002-00-069 Rev. A 6 - 113
When the database is 98% full, sample acquisition is prevented.
System calibration and control information is not affected when you
erase sample information. The system also does not affect standard
and control information while erasing data from the database.
‹ To erase information from the database:
1. Click Tools on the menu bar.
2. From the Tools menu, select Erase Database. The Choose Date
calendar appears. See Figure 106.
3. Choose the day after the last day of the database entries that you
want to erase. For example, all data prior to January 16 will be
erased. January 16 will be kept.
Figure 106. Choose Date Calendar
4. Click OK. The Delete Database Entries dialog box appears and
warns that you are about to delete database records.
Figure 107. Delete Database Entries Dialog Box
5. If you are sure you want to delete this data, click Yes. The
system deletes all events stored before the day you select.
Restore Database
Data
Restore the database from a previously saved database.