Luminex 100 IS Version 2.2 - Manual (Page 143)

x MAP Technology Using Luminex 100 IS 2.2 Software
PN 89-00002-00-069 Rev. A 6 - 89
2. Select a batch to analyze and click Select. The system loads the
batch and the Analysis window displays the Standards tab. See
Figure 80.
Figure 80. Analysis Window—Standards Tab (Data Reduction)
Four buttons appear in the upper-right corner of the Analysis
window:
Open Batch. Opens an existing batch that you want to analyze.
Export Data. Exports the data to the output csv file in the batch
folder. After selecting this button, there is no confirmation response.
Print Report. Prints the data interpretation report including the
Standards, Controls, graph of standards, and Samples data. See
“Print Data Analysis Report” on page 6-89.
Close. Closes the Analysis window.
Print Data
Analysis Report
A printed batch report includes the following criteria that is applied
to the batch during analysis:
• batch name and test name
• formula used
• curve fit
• standards
• controls