Luminex 100 IS Version 2.2 - Manual (Page 21)

x MAP Technology Safety
PN 89-00002-00-069 Rev. A 2 - 5
This label appears on the back of the Luminex XYP instrument.
The Luminex XYP instrument has been tested by UL.
Fluidics
This system contains fluidics. In the event of a fluidic leak, turn off
all power to the system and disconnect all power cords. Remember
that the on/off switch is not a disconnect means, the power cord must
be removed from the outlet. Contact Luminex Corporation for further
information.
Waste levels must be manually monitored—do not allow the
waste container to overflow! Empty the waste container each time
the sheath fluid container is filled. The waste container should not be
placed on top of the instrument.
Luminex 100 Analyzer
Laser
The Luminex 100 analyzer classifies per FDA 21 CFR 1040.10 and
1040.11 as a Class II laser product consisting of a Class I laser
product (Luminex 100 analyzer) and a Class II laser product
(barcode reader).
Warning: If biological samples have been tested with the system,
use your standard laboratory safety practices when handling
system waste.