Luminex 100 IS Version 2.2 - Manual (Page 162)

Luminex 100 IS User Manual Version 2.2 x MAP Technology
6 - 108 PN 89-00002-00-069 Rev. A
Patient Summary
Report
This report prints all the test results for a patient. It may include all
tests or selected tests on the report.
Quality Control
Report
This report is used to track the trends of assay standards and assay
controls over a period of time.
Maintenance
Report
This report provides a history of all maintenance operations
performed during the date range entered by the operator.
Batch Summary
Report
This report prints batch information in a sample versus test grid
format. A batch summary report is useful for an assay developer to
quickly reference a test result for a particular sample.
Calibration Trend
Report
This report provides information about all instrument calibration
operations that occurred during the date range entered by the
operator.
System Control
Trend Report
This report provides information about all verification operations that
were performed during the date range entered by the operator.
Print Reports
You can print reports from within the Luminex 100 IS 2.2 software
or external using a stand alone program included in the installation.
Print from within
Luminex 100 IS 2.2
‹ To print a report from a batch or a specific time frame:
Ensure that you install the printer before initiating the print
command.
1. Click Print Report. A Report Selection dialog box appears.
Figure 98. Report Selection Dialog Box
2. Select the type of report that you want to print and click Next.
For the Analyte Report, Clinical Patient Report, and Batch
Summary Report the Batch Selection dialog box appears. Select
the batch to print. See Figure 99. For the Quality Control Report,