Luminex 100 IS Version 2.2 - Manual (Page 165)

x MAP Technology Using Luminex 100 IS 2.2 Software
PN 89-00002-00-069 Rev. A 6 - 111
Export Batch Data ‹ To export batch data:
1. Click Export Batch Data from the toolbar . The Open
Batch dialog box appears. See Figure 102.
Figure 102. Open Batch Dialog Box—Select Batch
2. Select the desired batch to export.
3. Click Select. The system exports the information. The Export
Batch dialog box appears showing the name and location of the
exported data file. See Figure 103.
Figure 103. Batch Data Exported Dialog Box
4. Click OK to complete the operation.
Database
Management
You manage the system database by backing up and deleting saved
data and files.
The system stores data results for instrument calibrators, instrument
controls, assay calibrators, and assay controls. It records acquisition
and maintenance data in real-time to minimize data loss in case of
system failure. Each batch file records the date and time, command
cancellation (if applicable), and voltages used for the commands
performed during the batch.
Back Up the
Database
Back up the system database following the schedule set by your
laboratory. Your laboratory may require you to back the system up
weekly, daily, or after you complete each batch.