AMETEK ReFlex - Manual (Page 81)

ReFlex Power™ Controller ReFlex Power™
3-18 M380056-01 Rev J
3.5.1
C
ONTROLS AND
I
NDICATORS
Figure 3-5. RFPC Front Panel Controls, Indicators, and Connectors
1 Power – green LED indicates Controller power is On.
2 Fault – Red LED indicates either the Controller or any power module has
detected a high level system fault.
3 Bus - Green LED indicates Controller internal communication is in
process.
4 Interface connector providing hardware interface for remote isolated
digital control signals. Refer to Section 3.4.8 for connector information.
5 LAN Rst – Recessed pushbutton to reset the Controller to the LXI LAN
default requirements.