8 connectors, Rfp dc-16-20 mating connector kit – AMETEK ReFlex User Manual
Page 227
DC Power Supplies
ReFlex Power™
6-24
M380056-01 Rev K
6.4.8
C
ONNECTORS
The DC power supply modules have all user interface connectors located on the
front panel. Two connectors are provided: one for the power connections to the
load, and the other for control signal interface. Both connectors are of the D-
Subminiature construction.
This section presents first the Interface connector information (part numbers, a
drawing of the connector front face, and descriptions) for each of the power
supplies, RFP-D1016-021-XXXX, RFP-D1065-5A1-XXXX, RFP-D2033-030-
XXXX, RFP-D2050-020-XXXX, RFP-D2050-025-XXXX, RFP-D2120-8A3-XXXX,
and RFP-D2450-2A3-XXXX, in that order, followed by the DC Output connector
information and then the Remote Sense information.
WARNING
To prevent electrical shock, disconnect the AC/DC input service before
making any connections to the module.
RFP
DC-16-20
M
ATING
C
ONNECTOR
K
IT
LPDC-16V Mating Connector Kit - AMETEK Part No. 5380270-01, mates with
RFP-D1016-021-XXXX, and includes the following for both Interface and DC
Output connectors:
Bill of Material
Item
AMETEK
Part No.
Description
Qty
Manufacturer
Part No.
Manufacturer
Suggested Source(s)
1
856-214-07
Conn, 13P, DSUB, 8/20AWG,
Male
1 CBD13W6M2000Z Positronic Industries
Positronic Ind.
2
856-745-51
Contact, 10AWG, 30A, CL ETRY,
Male
4 MC4010D
Positronic Industries
Positronic Ind.
3
856-247-39 Conn, Backshell, 37P, Strt, 2 PC
1 D37000Z00
Positronic Industries
Positronic Ind.
4
856-214-09
Conn, 9P, DSUB, 20-24AWG,
Crimp, Male
1 SD9M1000Z
Positronic Industries
Positronic Ind.
5
856-247-10
Conn, Backshell, 9P, DSUB, 2
PC
1 D9000Z00
Positronic Industries
Positronic Ind.
R
ECOMMENDED
T
OOLS
(
NOT INCLUDED WITH
M
ATING
C
ONNECTOR KIT
)
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0
Insertion/extraction tool: Positronic Industries P/N M81969/1-02