AMETEK ReFlex - Manual (Page 37)

Mainframe ReFlex Power™
2-2 M380056-01 Rev J
adaptable. The modules feature the capability to be connected in configurations
such as series, parallel, and multi-phase to expand the voltage, current, and
power ratings beyond that of individual modules, minimizing the number of
unique assets comprising a system. For larger systems, the number of modules
could be further increased by interconnecting several Mainframes with external
controls/communications cables. Systems comprising eight Mainframes and up
to a maximum of nine-six modules could be produced.
The enclosure complies with industry-standard EIA rack mount requirements.
Front mounting flanges are provided, as well as a hole pattern on the chassis
that would accept rack slides or mounting rails. The thermal management has
been driven by the requirement to allow the dissipation of high power in a small
package, from supplies as well as active loads. Each module has integral fans,
optimized for the amount of heat that must be eliminated; no fans are required in
the Mainframe. Air intake is at the front of the modules, while the exhaust is at
the rear.
2.2.1 G
ENERAL
F
EATURES
• High module count, up to twelve single-width
•
Accepts single-width, double-width, triple-width modules
• System extensible up to eight Mainframes and ninety-six modules
•
Configuration flexibility, no restrictions on module slot location
• High power per slot, up to 1kW
• High aggregate output power, up to 6,000W
•
Universal inputs: AC (50/60 Hz, 400 Hz), DC, single-phase, three-
phase
• Auto-Termination communications bus
• Auto-Configuration backplane controls bus
•
Small size, 7” H x 19” W x 17” D
• Light weight, 11.6 lb
• EIA RS-310 rack mount, 4U enclosure
• Front entry modules
• Modules mount with captive fasteners
•
Ruggedized to MIL-PRF-28800F
• Corrosion-Resistant aluminum chassis