AMETEK ReFlex - Manual (Page 243)

DC Power Supplies ReFlex Power™
6-40 M380056-01 Rev K
RFP-D2050-025-XXXX, RFP-D2050-020-XXXX DC O UTPUT C ONNECTOR :
Connector: Positronic Industries P/N CBC21WA4M1000Z, AMETEK P/N 856-214-04
Crimp contacts: Positronic Industries P/N MC6020D
Pins: Positronic Industries P/N MC4010D, AMETEK P/N 856-745-51
Backshell: Positronic Industries P/N D37000Z00, AMETEK P/N 856-247-39
Wire size: Refer to table for recommended wire gauge/length.
A1
A2
A3
A4
2
10
9
DC Output
Out
N/U
Chas Gnd
Sense_Rtn
Sense
Out_Rtn
Out
Out_Rtn
3-8
1
12-17 N/U
T/P
T/P
T/P
T/P
T/P
T/P
Load
T/P = Twisted Pair; N/U = Not Used
N/U
N/U
11
Figure 6-14. RFP-D2050-025-XXXX DC Output Connector, Front Panel View, and Wiring Diagram
Table 6-11. RFP-D2050-025-XXXX, RFP-D2050-020-XXXX DC Output Connector Pinout
PIN NAME FUNCTION SIGNAL LEVEL
WIRE GAUGE,
AWG
MAXIMUM WIRE
LENGTH, FT
A1 OUT
Output: module output source;
connected to A3 ±50V; ±200V, maximum to
chassis
10
90, for 1.5V line drop at
12.5A
A2 OUT-RTN
Output: return for output source,
OUT; connected to A4 ±50V; ±200V, maximum to
chassis
10
90, for 1.5V line drop at
12.5A
A3 OUT
Output: module output source;
connected to A1 ±50V; ±200V, maximum to
chassis
10
90, for 1.5V line drop at
12.5A
A4 OUT-RTN
Output: return for output source,
OUT; connected to A2 ±50V; ±200V, maximum to
chassis
10
90, for 1.5V line drop at
12.5A
2 SNS
Input: remote sense connection
for OUT ±50V; ±200V, maximum to
chassis
20 90
11 SNS-RTN
Input: remote sense connection
for OUT-RTN ±50V; ±200V, maximum to
chassis
20 90
9 CHAS-GND Shield ground Chassis ground 20 90
1,3-
8,10,12
-17
- Reserved - - -
DC O UTPUT C ONNECTOR A CCESSORIES
• AMETEK P/N 5380446-01, HPDC 33V/50V Module, 9ft. Unterminated DC Output Cable Assembly.
• AMETEK P/N 5380446-03, HPDC 33V/50V Module, right angle, 9ft. Unterminated DC Output Cable
Assembly.