AMETEK ReFlex - Manual (Page 225)

DC Power Supplies ReFlex Power™
6-22 M380056-01 Rev K
Table 6-1. Mainframe Input and Power Allocation Information
INPUT
SERVICE
PHASES
INPUT
DESIGNATION
INPUT
CONNECTOR
PIN
INPUT SERVICE
CONNECTION
SLOT
SUPPLIED
100/115/120VAC
200/208VAC
220/230/240VAC
1
L1 F Phase
Slot 1-4
L1-RTN E Return
L2 A Phase
Slot 5-8
L2-RTN G Return
L3 B Phase
Slot 9-12
L3-RTN C Return
GND D Ground Slot 1-12
Safety GND Chassis GND Ground Chassis
200/208VAC
3
Delta
L1 F Phase-A
Slot 1-4
L1-RTN E Phase-B
L2 A Phase-B
Slot 5-8
L2-RTN G Phase-C
L3 B Phase-C
Slot 9-12
L3-RTN C Phase-A
GND D Ground Slot 1-12
Safety GND Chassis GND Ground Chassis
200/208VAC
220/230/240VAC
3
Wye
L1 F Phase-A
Slot 1-4
L1-RTN E Neutral
L2 A Phase-B
Slot 5-8
L2-RTN G Neutral
L3 B Phase-C
Slot 9-12
L3-RTN C Neutral
GND D Ground Slot 1-12
Safety GND Chassis GND Ground Chassis
210-300VDC DC
L1 F Source
Slot 1-4
L1-RTN E Return
L2 A Source
Slot 5-8
L2-RTN G Return
L3 B Source
Slot 9-12
L3-RTN C Return
GND D Ground Slot 1-12
Safety GND Chassis GND Ground Chassis
A plug/socket connector is provided on the rear panel of the Mainframe for
connecting the unit to the AC/DC power source. The connector also provides a
safety ground termination. The input power cable should include a safety ground
wire to connect the chassis of the Mainframe to the safety ground of the AC/DC
power source. Since the AC input leakage current of the Mainframe could exceed