AMETEK ReFlex - Manual (Page 245)

DC Power Supplies ReFlex Power™
6-42 M380056-01 Rev K
RFP-D2450-2A3-XXXX DC O UTPUT C ONNECTOR :
Connector: Positronic Industries P/N CBC21WA4M1000Z, AMETEK P/N 856-214-04
Crimp contacts: Positronic Industries P/N MC6020D
Pins A1-A4: Positronic Industries P/N MS4820D-50, AMETEK P/N 856-745-53
Backshell: Positronic Industries P/N D37000Z00, AMETEK P/N 856-247-39
Wire size: Maximum gauge 20 AWG (recommended)
Refer to table for recommended wire gauge/length.
Figure 6-16. RFP-D2450-2A3-XXXX DC Output Connector, Front Panel View, and Wiring Diagram
Table 6-13. RFP-D2450-2A3-XXXX DC Output Connector Pinout
PIN NAME FUNCTION SIGNAL LEVEL
WIRE
GAUGE,
AWG
MAXIMUM WIRE
LENGTH, FT
A1 OUT Output: module output source
±450V; ±450V, maximum to
chassis
20
44, for 1.5V line drop
at 2.3A
A2 OUT-RTN
Output: return for output
source, OUT ±450V; ±450V, maximum to
chassis
20
44, for 1.5V line drop
at 2.3A
A3 SNS
Input: remote sense connection
for OUT ±450V; ±450V, maximum to
chassis
20 44
A4 SNS-RTN
Input: remote sense connection
for OUT-RTN ±450V; ±450V, maximum to
chassis
20 44
9 CHAS-GND Shield ground Chassis ground 20 44
1-8,
10-17
- Reserved - - -
DC O UTPUT C ONNECTOR A CCESSORIES
• AMETEK P/N 5380447-01, HPDC 450V Module, 9ft. Unterminated DC Output Cable Assembly.
• AMETEK P/N 5380447-03, HPDC 450V Module, right angle, 9ft. Unterminated DC Output Cable
Assembly.