AMETEK ReFlex - Manual (Page 244)

ReFlex Power™ DC Power Supplies
M380056-01 Rev K 6-41
RFP-D2120-8A3-XXXX DC O UTPUT C ONNECTOR :
Connector: Positronic Industries P/N CBC21WA4M1000Z, AMETEK P/N 856-214-04
Crimp contacts: Positronic Industries P/N MC6020D
Pins A1, A2: Positronic Industries P/N MC4010D, AMETEK P/N 856-745-51
Pins A3, A4: Positronic Industries P/N MS4820D-50, AMETEK P/N 856-745-53
Backshell: Positronic Industries P/N D37000Z00, AMETEK P/N 856-247-39
Wire size: Refer to table for recommended wire gauge/length.
Figure 6-15. RFP-D2120-8A3-XXXX DC Output Connector, Front Panel View, and Wiring Diagram
Table 6-12. RFP-D2120-8A3-XXXX DC Output Connector Pinout
PIN NAME FUNCTION SIGNAL LEVEL
WIRE
GAUGE,
AWG
MAXIMUM WIRE
LENGTH, FT
A1 OUT Output: module output source
±120V; ±200V, maximum to
chassis
10
135, for 1.5V line drop
at 8.3A
A2 OUT-RTN
Output: return for output
source, OUT ±120V; ±200V, maximum to
chassis
10
135, for 1.5V line drop
at 8.3A
A3 SNS
Input: remote sense connection
for OUT ±120V; ±200V, maximum to
chassis
20 135
A4 SNS-RTN
Input: remote sense connection
for OUT-RTN ±120V; ±200V, maximum to
chassis
20 135
9 CHAS-GND Shield ground Chassis ground 20 135
1-8,
10-17
- Reserved - - -
DC O UTPUT C ONNECTOR A CCESSORIES
• AMETEK P/N 5380453-01, HPDC 120V Module, 9ft. Unterminated DC Output Cable Assembly.
• AMETEK P/N 5380453-03, HPDC 120V Module, right angle, 9ft. Unterminated DC Output Cable
Assembly.