5 general characteristics, Input voltage range, Input voltage sag/surge – AMETEK ReFlex User Manual
Page 215: Input current, Input frequency range, Output power derating
DC Power Supplies
ReFlex Power™
6-12
M380056-01 Rev K
6.3.5
G
ENERAL
C
HARACTERISTICS
I
NPUT
V
OLTAGE
R
ANGE
With AC input: 85 to 264VAC for 330W, 332W, 990W, 1000W, and 1035W
models
153.7 to 264VAC for 1250W model.
With DC input: 210 to 300VDC
I
NPUT
V
OLTAGE
S
AG
/S
URGE
With AC input: sag to 65% of nominal at 208VAC and 230VAC input for
450ms
surge to 135% of nominal at 208VAC and 230VAC input for
450ms
With DC input: 314VDC, maximum for 2s
364.5VDC, maximum for 450ms
I
NPUT
C
URRENT
Power factor corrected single-phase AC input, sinusoidal AC current;
unipolar DC input, continuous DC current.
RFP-D1016-021-XXXX, RFP-D1065-5A1-XXXX: 4A at 103.5VAC; 1.5A at 270VDC
RFP-D2033-030-XXXX, RFP-D2050-020-XXXX, RFP-D2120-8A3-XXXX,
RFP-D2450-2A3-XXXX:
12A at 103.5VAC; 4.5A at 270VDC
RFP-D2050-025-XXXX:
8.3A at 187.2VAC; 5.6A at 270VDC
I
NPUT
F
REQUENCY
R
ANGE
With 85-264VAC input: 47-63Hz
With 85-132VAC input: 380-420Hz
With 153.7-264VAC input: 47-63Hz
O
UTPUT
P
OWER
D
ERATING
The output power is derated, dependent on the AC input voltage:
For 330W, 332W, 990W, 1000W, and 1035W models:
≤103.5VAC to ≥95VAC: linearly derated from 100% to 85% of rated power
≤95VAC to ≥85VAC: linearly derated from 85% to 75% of rated power
For 1250W models: