AMETEK ReFlex - Manual (Page 293)

Active Loads ReFlex Power™
7-18 M380056-01 Rev J
Table 7-1. Input Power Allocation
Input
Service
Phases
Input
Designation
Input
Connector
Pin
Input Service
Connection
Slot
Supplied
100/115/120VAC
200/208VAC
220/230/240VAC
1
L1 F Phase
Slot 1-4 L1-RTN E Return
L2 A Phase
Slot 5-8 L2-RTN G Return
L3 B Phase
Slot 9-12 L3-RTN C Return
GND D Ground Slot 1-12
Safety GND Chassis GND Ground Chassis
200/208VAC
3
Delta
L1 F Phase-A
Slot 1-4 L1-RTN E Phase-B
L2 A Phase-B
Slot 5-8 L2-RTN G Phase-C
L3 B Phase-C
Slot 9-12 L3-RTN C Phase-A
GND D Ground Slot 1-12
Safety GND Chassis GND Ground Chassis
200/208VAC
220/230/240VAC 3
Wye
L1 F Phase-A
Slot 1-4 L1-RTN E Neutral
L2 A Phase-B
Slot 5-8 L2-RTN G Neutral
L3 B Phase-C
Slot 9-12 L3-RTN C Neutral
GND D Ground Slot 1-12
Safety GND Chassis GND Ground Chassis
210-360VDC DC
L1 F Source
Slot 1-4 L1-RTN E Return
L2 A Source
Slot 5-8 L2-RTN G Return
L3 B Source
Slot 9-12 L3-RTN C Return
GND D Ground Slot 1-12
Safety GND Chassis GND Ground Chassis
A plug/socket connector is provided on the rear panel of the
Mainframe for connecting the unit to the AC/DC power source. The
connector also provides a safety ground termination. The input power
cable should include a safety ground wire to connect the chassis of
the Mainframe to the safety ground of the AC/DC power source. Since